TinyLogic UHS Dual Inverter

NC7WZ04

Description

The NC7WZ04 is a dual inverter from onsemi’s Ultra−High Speed (UHS) series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra−high speed with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC range. The inputs tolerate voltages up to 5.5 V independent of VCC operating voltage.

Features

  • Ultra−High Speed: tPD = 2.3 ns (Typical) into 50 pF at 5 V VCC
  • High Output Drive: ±24 mA at 3 V VCC
  • Broad VCC Operating Range: 1.65 V to 5.5 V
  • Matches Performance of LCX when Operated at 3.3 V VCC
  • Power Down High−Impedance Inputs / Outputs
  • Over−Voltage Tolerance Inputs Facilitate 5 V to 3 V Translation
  • Proprietary Noise / EMI Reduction Circuitry
  • Space−Saving SC−88 6−Lead Package
  • Ultra−Small MicroPak™ Packages
  • Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

ORDERING INFORMATION

See detailed ordering, marking and shipping information in the package dimensions section on page 6 of this data sheet.

Pin Configurations

Figure 2. SC−88 (Top View)

  1. AAA represents product code top mark (see Ordering Information).
  2. Orientation of top mark determines pin one location.

Figure 3. MicroPak (Top Through View)

  1. Orientation of top mark determines pin one location.
  2. Reading the top mark left to right, pin one is the lower left pin.

PIN DEFINITIONS

Pin # SC-88 Pin # MicroPak Name Description
1 1 A Input
2 2 GND Ground
3 3 A Input
4 4 Y Output
5 5 VCC Supply Voltage
6 6 Y Output

FUNCTION TABLE

Input Output
A Y
L H
H L

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Min Max Unit
$V_{CC}$ Supply Voltage -0.5 6.5 V
$V_{IN}$ DC Input Voltage -0.5 6.5 V
$V_{OUT}$ DC Output Voltage -0.5 6.5 V
$I_{IK}$ DC Input Diode Current $V_{IN}<0$ V - -50 mA
$I_{OK}$ DC Output Diode Current $V_{OUT}<0$ V - -50 mA
$I_{OUT}$ DC Output Source/Sink Current - $\pm 50$ mA
$I_{CC}\text{ or } I_{GND}$ DC $V_{CC}$ or Ground Current - $\pm 100$ mA
$T_{STG}$ Storage Temperature Range -65 +150 $^\circ C$
$T_{J}$ Junction Temperature Under Bias - +150 $^\circ C$
$T_{L}$ Junction Lead Temperature(Soldering,10Seconds) - +260 $^\circ C$
$P_{D}$ Power Dissipation in Still Air SC-88 - 332 mW
MicroPak-6 - 812
MicroPak2™-6 - 812
ESD Human Body Model,JEDEC:JESD22-A114 - 4000 V
Charge Device Model,JEDEC:JESD22-C101 - 2000

RECOMMENDED OPERATING CONDITIONS

Symbol Parameter Conditions Min Max Unit
VCC Supply Voltage Operating 1.65 5.5 V
VIN Input Voltage 0 5.5 V
VOUT Output Voltage 0 VCC V
TA Operating Temperature -40 +85 ℃
θJA Thermal Resistance SC-88 - 377 ℃/W
MicroPak-6 - 154
MicroPak2-6 - 154 ℃/W

DC ELECTRICAL CHARACTERISTICS

Symbol Parameter VCC(V) Conditions TA=+25℃ TA=-40 to +85℃ Unit
Min Typ Max Min Max
VIH HIGH Level Input Voltage 1.65 to 1.95 0.65 VCC - - 0.65 VCC - V
VIL LOW Level Input Voltage 1.65 to 1.95 - - 0.35 VCC - 0.35 VCC V
VOH HIGH Level Output Voltage 1.65 VIH=VIH or VILOH=-100μA 1.55 1.65 - 1.55 - V
VOL LOW Level Output Voltage 1.65 VIH=VIH or VILOL=100μA - 0.10 0.10 - 0.10 V
IIN Input Leakage Current 1.65 to 5.5 0≤VIIN≤5.5V - - ±1 - ±1.0 μA
ICC Quiescent Supply Current 1.65 to 5.50 VIIN=5.5V,GND - - 1 - 10 μA

AC ELECTRICAL CHARACTERISTICS

Symbol Parameter VCC(V) Conditions TA=+25℃ TA=-40 to +85℃ Unit
Min Typ Max Min Max
tPLH,tPHL Propagation Delay 1.65 CL=15pF,RL=1MΩ - 5.3 9.2 - 11.0 ns
CIN Input Capacitance 0.00 - 2.5 - - - pF

DEVICE ORDERING INFORMATION

Device Top Mark Packages Shipping
NC7WZ04P6X Z04 6-Lead SC70,EIAJ SC-88,1.25mm Wide 3000/Tape&Reel
NC7WZ04L6X A7 6-Lead MicroPak,1.00mm Wide 5000/Tape&Reel
NC7WZ04FHX A7 6-Lead,MicroPak2,1x1mm Body,.35mm Pitch 5000/Tape&Reel

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

SC−88 2.00x1.25x0.90, 0.65P