QFNW32 7x7, 0.65P
CASE 484AG
ISSUE A
DATE 07 AUG 2018
NOTES:
- DIMENSIONS AND TOLERANCING PER ASME Y14.5M, 1994.
- CONTROLLING DIMENSION: MILLIMETERS.
- DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.10 AND 0.20MM FROM THE TERMINAL TIP.
- COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS.
- THIS DEVICE CONTAINS WETTABLE FLANK DESIGN FEATURES TO AID IN FILLET FORMATION ON THE LEADS DURING MOUNTING.
DIMENSIONS
| DIM | MILLIMETERS | ||
|---|---|---|---|
| MIN | NOM | MAX | |
| A | 0.80 | 0.85 | 0.90 |
| A1 | --- | --- | 0.05 |
| A3 | 0.20 REF | ||
| A4 | 0.10 | --- | --- |
| b | 0.25 | 0.30 | 0.35 |
| D | 6.90 | 7.00 | 7.10 |
| D2 | 4.60 | 4.70 | 4.80 |
| E | 6.90 | 7.00 | 7.10 |
| E2 | 4.60 | 4.70 | 4.80 |
| e | 0.65 BSC | ||
| K | 0.60 REF | ||
| L | 0.50 | 0.55 | 0.60 |
| L3 | 0.05 REF |
GENERIC MARKING DIAGRAM*
| DOCUMENT NUMBER: | 98AON64071G | DESCRIPTION: | QFNW32 7x7,0.65P |
|---|---|---|---|
| PAGE 1 OF 1 |
(Note: Microdot may be in either location)
!
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others.