# QFN24 5x5, 0.65P  
**CASE** 485CS  
**ISSUE** O  
**DATE** 24 OCT 2012

## NOTES:

1. DIMENSIONS AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 MM FROM THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS.

## DOCUMENT NUMBER:  
98AON84592E

| DIM | MILLIMETERS |  |  
| --- | --- | --- |  
| MIN | MAX |  |  
| A | 0.80 | 0.90 |  
| A1 | --- | 0.05 |  
| A3 | 0.20 REF |  |  
| b | 0.25 | 0.35 |  
| D | 5.00 BSC |  |  
| D2 | 3.40 | 3.60 |  
| E | 5.00 BSC |  |  
| E2 | 3.40 | 3.60 |  
| e | 0.65 BSC |  |  
| K | 0.20 MIN |  |  
| L | 0.30 | 0.50 |  
| L1 | --- | 0.15 |

## GENERIC MARKING DIAGRAM*

XXXXX = Specific Device Code  
A = Assembly Location

### DESCRIPTION:

Electronic versions are uncontrolled except when accessed directly from the Document Repository.  
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

- WL = Wafer Lot  
- YY = Year  
- WW = Work Week

*Pb−Free Package*  
(Note: Microdot may be in either location)

*This information is generic. Please refer to device data sheet for actual part marking.*

Pb−Free indicator, “G” or microdot,
may or may not be present.